312001942 - 3340B52 RIGID PIPE (ONE) FROM MASTER CYLINDER (PUMP) TO A.B.S HYDRAULIC CONTROL UNIT - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R 1. Shut off the brake fluid reservoir using the special tool.

Tool	Description	Function	Validity
2.000.001.400	Plug	Brake/ clutch system vacuum	all versions

- To remove the brake servo side pipe, refer to the operation of dismantling the braking system node.    Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R. - Carry out the operations described below to remove the remaining pipe. 1. Undo the connectors (1a), control unit and master cylinder, and remove the rigid pipe (1b), releasing it from the retaining clip (1c). Refitting ( Removing ) - To refit the brake servo side pipe, refer to the operation of reassembling the braking system node.    Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT - R.R. - Carry out the operations described below to refit the remaining pipe. 1. Place the pipe (1a) in position and tighten the control unit and master cylinder side connectors (1b) to the recommended torque.2. Secure the pipe to the retaining clips.

Component	Fastening	dia	Value (daNm)	Validity
Rigid brake pipes to A.B.S./E.S.P. control unit	Connector	M10x1	1.6	all versions

Component	Fastening	dia	Value (daNm)	Validity
Rigid brake pipes to A.B.S./E.S.P. control unit	Connector	M12x1	1.6	all versions

- Remove the tool used for shutting off the brake fluid reservoir.

Tool	Description	Function	Validity
2.000.001.400	Plug	Brake/ clutch system vacuum	all versions

    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR - Remove the vehicle from the lift.