312001944 - 3340B56 RIGID PIPE FROM HYDRAULIC CONTROL UNIT TO RIGHT FRONT BRAKE - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 4450B04 RIGHT FRONT WHEEL - R.R 1. Shut off the brake fluid reservoir using the special tool.
ToolDescriptionFunctionValidity
2.000.001.400PlugBrake/ clutch system vacuumall versions
1. Disconnect the electrical connection for the braking system control unit.
DescriptionConnector
1Braking system control unit (NFR)    See M051 Braking system control unit
2. Undo the connector for the rigid pipe, braking system control unit side.
- Release the pipe from the retaining clips. 1. Undo the connector (1a) and disconnect the rigid pipe (1b) from the flexible pipe (1c).2. Remove the rigid pipe from the housing.
Refitting ( Removing ) - Check the condition of the flexible pipe. If it is not intact, replace it. 1. Connect the rigid pipe (1a) to the flexible pipe (1b) and tighten the connector (1c) to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Rigid pipe to hoseConnectorM10x11.6T.i.T
- Secure the rigid pipe to the retaining clips. 1. Connect the rigid pipe (1a), braking system control unit side and tighten the connector (1b) to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Rigid brake pipes to A.B.S./E.S.P. control unit ConnectorM12x11.6all versions
2. Connect the electrical connection for the braking system control unit.
DescriptionConnector
2Braking system control unit (NFR)    See M051 Braking system control unit
- Remove the tool used for shutting off the brake fluid reservoir.
ToolDescriptionFunctionValidity
2.000.001.400PlugBrake/ clutch system vacuumall versions
    Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR - Remove the vehicle from the lift.