2710A10 DRIVESHAFT WITH JOINTS (ONE), L/H OR R/H - R + R - Fiat - NUOVA 500 - eLearn

312000504 - 2710A10 DRIVESHAFT WITH JOINTS (ONE), L/H OR R/H - R + R

) - Position the vehicle on a lift. Op. 0010T40 CHANGE MANUAL GEARBOX OIL - Carry out the following operations for the left side: Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 4410D22 BRACKET FIXING FRONT SUSPENSION CROSSMEMBER TO BODYSHELL (ONE), LEFT OR RIGHT - R.R. Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. - Carry out the following operations for the right side: Op. 4450B02 LEFT FRONT WHEEL - R.R - Carry out the following operations for the removal of the driveshaft, left or right: 1. Remove the staking from the nut fixing the wheel hub.

1. Undo the nut (1b) fixing the wheel hub using the tool (1a).

Tool	Description	Function	Validity
1.870.815.000	Counter-torque	Loosen/tighten wheel hub fixing nut to torque	all versions

1. Undo the bolt (1a) and remove the wheel rpm sensor (1b) from its seat.

1. Undo the bolts securing the wheel hub to the wheel strut.

1. Release the steering rod (1b) from the wheel hub (1c) using the tool (1a).

Tool	Description	Function	Validity
1.871.000.700	Extractor	Separation of steering track rod end from wheel hub	all versions

1. Release the driveshaft from the housing in the gearbox using the special tool on the sliding joint.

Refitting ( Removing

) - Fit the driveshaft in place on the gearbox.- Fit the steering rod to the wheel hub. 1. Tighten the nut fixing the steering track rod end to the wheel hub to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering track rod end to steering knuckle	Nut	M10x1.25	4.0	all versions

1. Tighten the bolts fixing the wheel hub to the steering knuckle to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Shock absorber (on steering knuckle)	Nut	M10x1.25	7.5	all versions

- Place the wheel rpm sensor in position and tighten the fixing bolt. 1. Pre-tighten the nut (1b) fixing the wheel hub to the recommended torque using the tool (1a).

Tool	Description	Function	Validity
1.870.815.000	Counter-torque	Loosen/tighten wheel hub fixing nut to torque	all versions

Component	Fastening	dia	Value (daNm)	Validity
Front wheel hub to joint (pre-tightening)	Nut	M22x1.25	7.0 ± 5% ± 55° ± 2°	1.2 8V

- Then tighten the nut to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front wheel hub to joint (final tightening)	Nut	M22x1.25	20.0 ÷ 35.0	1.2 8V

- Proceed with staking the fixing nut.- Carry out the following operations for the right side: Op. 4450B02 LEFT FRONT WHEEL - R.R - Carry out the following operations for the left side: Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 4410D22 BRACKET FIXING FRONT SUSPENSION CROSSMEMBER TO BODYSHELL (ONE), LEFT OR RIGHT - R.R. Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. - Having completed the above operations, proceed with refilling the transmission fluid as described in the procedure: Op. 0010T40 CHANGE MANUAL GEARBOX OIL - Remove the vehicle from the lift.