312000825 - 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R

Removing ( Refitting ) - Disconnect the negative battery terminal.

	Description	Connector
-	Battery	See A001 BATTERY

1. Disconnect the electrical connections for the injection control unit.

	Description	Connector
1	Engine management control unit	See M010 ENGINE MANAGEMENT ECU

2. Undo the nuts (2a) and remove the injection control unit (2b). Refitting ( Removing )

If the injection-ignition system control unit is replaced, run the following self-learning procedure:- with the engine switched off, turn the ignition key ON without pressing the accelerator pedal and with the engine temperature between 5.25°C and 100.5°C for 29 seconds.If the vehicle is equipped with a climate control systemthe following self-learning procedure must also be carried out:- activate the climate control system using the special button and operate the knob to select the second fan speed for 15 seconds.

1. Fit the injection control unit (1a) in its housing and tighten the retaining nuts (1b).2. Connect the electrical connections for the injection control unit.

	Description	Connector
2	Engine management control unit	See M010 ENGINE MANAGEMENT ECU

- Connect the negative battery terminal.

	Description	Connector
-	Battery	See A001 BATTERY