312000837 - 1088C14 WATER PUMP - R + R WITH TIMING BELT(S) REMOVED
Removing
(
Refitting
)
Op. 0010T20 ENGINE COOLANT - CHANGE
1. Undo the bolts (1a) and the nut (1b) and remove the water pump (1c) cutting the sealant.
Refitting
(
Removing
)
- Clean the residues of sealant from the mating surfaces between the engine block and the water pump.- Apply a strip of silicone sealant to the contact surfaces between the water pump and the engine block.- Place the water pump in position and tighten the nut and the bolts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Water pump (on engine block) | Nut | M6x1 | 1.0 | 1.4 16V |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Water pump (on engine block) | Bolt | M6x1x22 | 1.0 | 1.4 16V |