312000988 - E3510 RADIO - DESCRIPTION (Preparation for radio)

DESCRIPTION

The vehicle can be fitted, on request, with a simple radio preparation, (opt. 082) which includes a simple power supply for the radio not fitted on the vehicle, but installed in the aftermarket in accordance with the following ISO standard pin out:

  • pin A1 : n.c.
  • pin A2 : n.c.
  • pin A3 : n.c.
  • pin A4 : direct supply (+30)
  • pin A5 : aerial power supply
  • pin A6 : control lighting
  • pin A7 : ignition-operated power supply INT (+15)
  • pin A8 : earth
The pins connected with the speakers are the same as the standard version (pins B1-B8).
The radio installed in the AFTERMARKET is therefore not a CAN node through which information is exchanged with the Body Computer and with the other electronic units.
The vehicle is equipped with wiring comprising:

  • 2 mid-woofer front speakers located in the doors;
  • 2 tweeters located in the front pillars near the rear view mirror triangles;
  • cables connecting the radio with the speakers;
  • stylus aerial with support mounted at the rear of the roof, coaxial cable and supply lead for aerial.
    See descriptions 5570 ACCESSORIES To prevent the user tampering with the vehicle wiring and the connection to supply lines other than those intended, there is also further preparation in the AFTERMARKET. This preparation involves the connection, through three dedicated connectors, of a direct battery power supply (+30), an ignition-controlled power supply (+15) and an earth connection useful when fitting the radio. There is no connecting wiring for the consoles or the aerial nor actual components on this option.