312001239 - 5505B10 FRONT DOOR WIRING (ONE), LEFT OR RIGHT - R.R. WITH WATER GUARD OR FRAME DETACHED

Removing ( Refitting ) Op. 7040L42 1. Undo bolts (1a) and place bonnet lid release lever (1b) to one side.
This operation is only to be undertaken when removing the front door wiring loom, driver''s side.
1. Disconnect the front door electrical coupling and prise it up from the mounting bracket.
DescriptionConnector
1Left front door coupling    See D030 DRIVER'S FRONT DOOR COUPLING
DescriptionConnector
1Right front door coupling    See D031 PASSENGER FRONT DOOR COUPLING
1. Via opening (1b) on the body, withdraw door (1a) electrical wiring section that is connected to the remaining wiring in the passenger compartment.
- Release the door electrical wiring from the retaining clips and remove it. Refitting ( Removing ) - Check the condition of the door electrical wiring.- If necessary, test the continuity of the different pins on the electrical connectors.- Position the electrical wiring in its housing and connect it to the retaining clips. 1. Via opening (1b) on the body, reposition door (1a) electrical wiring section that is connected to the remaining wiring in the passenger compartment.
1. Connect the front door electrical coupling and fit it to the mounting bracket.
DescriptionConnector
1Left front door coupling    See D030 DRIVER'S FRONT DOOR COUPLING
DescriptionConnector
1Right front door coupling    See D031 PASSENGER FRONT DOOR COUPLING
- Place the bonnet opening control lever in position and screw in the retaining bolts.
This operation is only to be undertaken when fitting the front door wiring loom, driver''s side.
Op. 7040L42