312001937 - 3340A30 RPM SENSOR (ONE) FOR ONE FRONT WHEEL, LEFT OR RIGHT - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Disconnect the negative battery terminal.

	Description	Connector
-	Battery	See A001 BATTERY

- Proceed with the removal of the front wheel arch depending on the wheel rpm sensor to be removed.- Procedures to be carried out for the left side:    Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 4410D22 BRACKET FIXING FRONT SUSPENSION CROSSMEMBER TO BODYSHELL (ONE), LEFT OR RIGHT - R.R.     Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R. - Procedures to be carried out for the right side:    Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 4410D22 BRACKET FIXING FRONT SUSPENSION CROSSMEMBER TO BODYSHELL (ONE), LEFT OR RIGHT - R.R.     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R. - Carry out the operations described below for the removal of the front wheel rpm sensor, left or right side. 1. Disconnect the electrical connection for the front wheel rpm sensor.

	Description	Connector
1	Left front wheel sensor for ABS	See K070 LEFT FRONT WHEEL SENSOR FOR ABS

	Description	Connector
1	Right front wheel sensor for ABS	See K071 RIGHT FRONT WHEEL SENSOR FOR ABS

2. Release the electrical wiring for the sensor from the retaining clips. 1. Undo the fixing bolt (1a) and remove the front wheel rpm sensor (1b). Refitting ( Removing ) - Place the front wheel rpm sensor in position and tighten the fixing bolts.