312001953 - 4410A10 L/H OR R/H FRONT SUSPENSION SPRING/DAMPER UNIT (ONE) - R+R - CHECK WHEEL GEOMETRY SEPARATELY IF NECESSARY

Removing ( Refitting ) - Position the vehicle on a lift.- Disconnect the negative battery terminal.

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R     Op. 7210E22 R.R. WINDSCREEN BASE TRIM - Proceed with removing the front wheel depending on the spring/shock absorber assembly to be removed.    Op. 4450B02 LEFT FRONT WHEEL - R.R - or    Op. 4450B04 RIGHT FRONT WHEEL - R.R 1. Undo the fixing nut (1a) and remove the mounting (1b) underneath.

Before undoing the nut (1a), insert the spanner correctly right into the hexagonal groove.

1. Release the flexible pipe (1a) for the hydraulic braking system and the electrical wiring (1b) for the front wheel rpm sensor from the bracket (1c) on the spring/shock absorber assembly.

The electrical wiring for the front brake pad wear sensor must be released from the retaining clip for the left spring/shock absorber assembly.

1. Undo the bolts securing the wheel hub to the steering knuckle.- Remove the spring/shock absorber assembly. Refitting ( Removing ) 1. Tighten the bolts fixing the wheel hub to the steering knuckle to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Shock absorber (on steering knuckle)	Nut	M10x1.25	7.5	all versions

- Secure the flexible pipe for the hydraulic braking system and the electrical wiring for the front wheel rpm sensor to the bracket on the spring/shock absorber assembly.

The electrical wiring for the front brake pad wear sensor must be secured to the retaining clip for the left spring/shock absorber assembly.

1. Fit the mounting in place.2. Tighten the nut fixing the spring/shock absorber assembly to the turret using the special tool.

Tool	Description	Function	Validity
1.854.015.000	Spanner for shock absorber stem fixing nut	Loosen/tighten the spring/shock absorber assembly fixing nut	all versions

Component	Fastening	dia	Value (daNm)	Validity
Shock absorber (on turret)	Nut	M12x1.25	4.5	all versions

- Proceed with refitting the front wheel depending on the spring/shock absorber assembly removed.    Op. 4450B02 LEFT FRONT WHEEL - R.R - or    Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7210E22 R.R. WINDSCREEN BASE TRIM     Op. 5050B34 WINDSCREEN WIPER ARM/S COMPLETE WITH BLADE - R+R - Connect the negative battery terminal.

	Description	Connector
-	Battery	See A001 BATTERY

- Remove the vehicle from the lift.