312002060 - 1004D40 ENGINE - POSITION ON STAND AND REMOVE

1. Undo bolts (1a) and remove engine flywheel (1b) complete with safety washer (1c).2. Undo the bolt and remove the flywheel lock.3. Undo bolt (3a) and remove guards (3b). 1. Using the tool and a hydraulic lift, place the engine on the overhaul stand.

Tool	Description	Function	Validity
1.871.000.000	Overhaul stand	Engine overhaul	all versions

- Support the engine using the mounting tools and a hydraulic lift.- Undo the bolts securing the engine block to the overhaul stand mount.- Place the engine on a suitable board.- Place the engine flywheel guards in position and tighten the lower guard bolt.- Place the flywheel in position complete with safety washer, taking care over the centring bush. Screw in the new bolts without tightening to torque.- Fit the flywheel lock.- Tighten the new bolts securing the engine flywheel to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Engine flywheel (on crankshaft)	Bolt	M8x1.25x22	1.5 + 40°	1.2 8V1.4 16V