312002062 - 1016B10 SINGLE CAMSHAFT HOUSING - REPLACE GASKET

Removing ( Refitting ) - Disconnect the negative battery terminal.

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 0010T20 ENGINE COOLANT - CHANGE     Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R    Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R.R. Op. 1072B50 AIR CHAMBER - R.R.    Op. 1056B15 THROTTLE BODY INTERGRAL WITH MDS - R.R.    Op. 1072B10 INLET MANIFOLD - R + R AND REPLACE SEAL    Op. 5510C14 IGNITION COIL/S - R.R.     Op. 5510C30 ENGINE TIMING SENSOR - R+R     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 4410D22 BRACKET FIXING FRONT SUSPENSION CROSSMEMBER TO BODYSHELL (ONE), LEFT OR RIGHT - R.R.     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.     Op. 1088B10 ENGINE COOLANT SUPPLY RESERVOIR - R.R.     Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.     Op. 1092G11 ENGINE COMPONENTS SINGLE DRIVE BELT - R.R. FOR VERSIONS WITH AIR CONDITIONING     Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1032B14 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT VERSIONS WITH AIR CONDITIONER     Op. 1008C30 POWER UNIT LOWER REACTION LINK - R.R.    Op. 1008C34 BRACKET ON GEARBOX FOR LOWER REACTION ROD - R.R.    Op. 1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONING     Op. 1084A16 OIL DIPSTICK PIPE - R.R 1. Unscrew protective caps (1a) and, using the specific tool, unscrew bolts underneath (1b).

Tool	Description	Function	Validity
1.860.834.000	Spanner	Loosen/tighten the cylinder head extension bolts	1.4 16V

2. Gently raise the cylinder head extension and insert the tool to secure the tappets.

Tool	Description	Function	Validity
1.860.988.000	Tappet retaining tool	Tappet retaining	1.4 16V

3. Remove the cylinder head extension from its housing and retrieve the seal underneath. Refitting ( Removing ) - Fit a new cylinder head extension gasket. 1. Use specific tool for securing tappets (1a), position cylinder head extension (1b) in its housing.

Tool	Description	Function	Validity
1.860.988.000	Tappet retaining tool	Tappet retaining	1.4 16V

2. Use the tool to tighten the cylinder head extension bolts to the specified torque.

Tool	Description	Function	Validity
1.860.834.000	Spanner	Loosen/tighten the cylinder head extension bolts	1.4 16V

Component	Fastening	dia	Value (daNm)	Validity
Camshaft housing (on cylinder head)	Bolt	M8x1x50	1.5	1.4 16V

3. Tighten the protective caps to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Camshaft housing bolts sealing plug	-	M16x1	1.5	1.4 16V

    Op. 1084A16 OIL DIPSTICK PIPE - R.R     Op. 1092A12 CRANKSHAFT PULLEY - R+R FOR VERSIONS WITH AIR CONDITIONING     Op. 1008C34 BRACKET ON GEARBOX FOR LOWER REACTION ROD - R.R.    Op. 1008C30 POWER UNIT LOWER REACTION LINK - R.R.    Op. 1032B14 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT VERSIONS WITH AIR CONDITIONER     Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1092G11 ENGINE COMPONENTS SINGLE DRIVE BELT - R.R. FOR VERSIONS WITH AIR CONDITIONING     Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.     Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 1088B10 ENGINE COOLANT SUPPLY RESERVOIR - R.R.     Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 4410D22 BRACKET FIXING FRONT SUSPENSION CROSSMEMBER TO BODYSHELL (ONE), LEFT OR RIGHT - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 5510C30 ENGINE TIMING SENSOR - R+R     Op. 5510C14 IGNITION COIL/S - R.R.     Op. 1072B10 INLET MANIFOLD - R + R AND REPLACE SEAL    Op. 1056B15 THROTTLE BODY INTERGRAL WITH MDS - R.R.Op. 1072B50     Op. 1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R.R.     Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R + R    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R     Op. 0010T20 ENGINE COOLANT - CHANGE - Connect the negative battery terminal.

	Description	Connector
-	Battery	See A001 BATTERY