312002450 - 4420D20 REAR SUSPENSION AXLE - REPLACE - INCLUDES R+R, CHECK, PARTS TRANSFER AND BLEEDING - CHECK WHEEL GEOMETRY SEPARATELY

Removing ( Refitting )     Op. 7040L20 TUNNEL COVER - R.R     Op. 4450B08 RIGHT REAR WHEEL - R.R     Op. 4450B06 LEFT REAR WHEEL - R.R     Op. 4420D10 REAR SUSPENSION AXLE - R+R INCLUDES BLEEDING     Op. 4420A48 REAR SUSPENSION COIL SPRINGS - R.R.     Op. 4420A35 REAR SUSPENSION DAMPERS - R.R. - CHECK WHEEL GEOMETRY SEPARATELY     Op. 3320B34 REAR BRAKE DRUMS - R.R. - Remove both wheel hub covers:    Op. 4450D70 HUB CAP FOR ONE REAR WHEEL, LEFT OR RIGHT - R.R. - Remove both wheel hubs:    Op. 4450D10 HUB FOR ONE REAR WHEEL, L/H OR R/H - R+R WITH WHEEL REMOVED - CHECK WHEEL GEOMETRY SEPARATELY - Remove both wheel hub stub axles:    Op. 4450D15 STUB AXLE FOR ONE REAR WHEEL HUB, LEFT OR RIGHT - R.R INCLUDES POSSIBLE BUSH REPLACEMENT - CHECK WHEEL GEOMETRY SEPARATELY - Remove both flexible intermediate pipes to the rear brakes:    Op. 3340B34 INTERMEDIATE HOSE (ONE), LEFT OR RIGHT, TO THE REAR BRAKES - R.R.- Remove both rigid intermediate pipes to the rear brakes:    Op. 3340B74 RIGID PIPE FROM CONNECTOR TO REAR BRAKES . (ONE), LEFT OR RIGHT - R.R.    Op. 3340A35 LEFT REAR WHEEL RPM SENSOR - R.R.    Op. 3340A37 RIGHT REAR WHEEL RPM SENSOR - R.R.- Remove both handbrake cables:    Op. 3380A35 HANDBRAKE CONTROL CABLE (ONE), LEFT OR RIGHT - R.R.- Remove both supports for the rear suspension axle:    Op. 4420D30 REAR SUSPENSION AXLE AXLE SUPPORT, LEFT OR RIGHT - R.R.- Remove both bushes for the rear axle. 1. Position the special tool and extract the bush.
ToolDescriptionFunctionValidity
2.000.025.600Extractor/ fitting toolRemoving-refitting rear axle bushall versions
- Proceed in the same way for the bush on the opposite side of the axle.- Keep the special tool. Refitting ( Removing ) - Position a new bush and check the alignment.
Use soapy water to facilitate the fitting of the bush.
1. Position the special tool (1a) and fit the bush (1b) in place.
ToolDescriptionFunctionValidity
2.000.025.600Extractor/ fitting toolRemoving-refitting rear axle bushall versions
- Proceed in the same way for the bush on the opposite side of the axle.- Keep the special tool.- Fit both supports for the rear suspension axle:    Op. 4420D30 REAR SUSPENSION AXLE AXLE SUPPORT, LEFT OR RIGHT - R.R.- Fit both handbrake cables:    Op. 3380A35 HANDBRAKE CONTROL CABLE (ONE), LEFT OR RIGHT - R.R.    Op. 3340A37 RIGHT REAR WHEEL RPM SENSOR - R.R.    Op. 3340A35 LEFT REAR WHEEL RPM SENSOR - R.R.- Fit both rigid intermediate pipes to the rear brakes:    Op. 3340B74 RIGID PIPE FROM CONNECTOR TO REAR BRAKES . (ONE), LEFT OR RIGHT - R.R.- Fit both flexible intermediate pipes to the rear brakes:    Op. 3340B34 INTERMEDIATE HOSE (ONE), LEFT OR RIGHT, TO THE REAR BRAKES - R.R.- Fit both wheel hub stub axles:    Op. 4450D15 STUB AXLE FOR ONE REAR WHEEL HUB, LEFT OR RIGHT - R.R INCLUDES POSSIBLE BUSH REPLACEMENT - CHECK WHEEL GEOMETRY SEPARATELY - Fit both wheel hubs:    Op. 4450D10 HUB FOR ONE REAR WHEEL, L/H OR R/H - R+R WITH WHEEL REMOVED - CHECK WHEEL GEOMETRY SEPARATELY - Fit both wheel hub covers:    Op. 4450D70 HUB CAP FOR ONE REAR WHEEL, LEFT OR RIGHT - R.R.     Op. 3320B34 REAR BRAKE DRUMS - R.R.     Op. 4420A35 REAR SUSPENSION DAMPERS - R.R. - CHECK WHEEL GEOMETRY SEPARATELY     Op. 4420A48 REAR SUSPENSION COIL SPRINGS - R.R.     Op. 4420D10 REAR SUSPENSION AXLE - R+R INCLUDES BLEEDING     Op. 4450B06 LEFT REAR WHEEL - R.R     Op. 4450B08 RIGHT REAR WHEEL - R.R     Op. 7040L20 TUNNEL COVER - R.R     Op. 3380A04 HANDBRAKE - ADJUST TRAVEL     Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR