323001557 - 7040H38 CENTRE PILLAR UPPER ELEMENT (ONE), LEFT OR RIGHT - R.R

Removing ( Refitting )     Op. 7040L48 FRONT AND REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.    Op. 7040H36 CENTRE PILLAR LOWER ELEMENT (ONE), LEFT OR RIGHT - R.R 1. Remove panel (1a) using the special tool, releasing retainers (1b) and then retainers (1c).2. Unscrew bolt (2a) and move end (2b) of the front seat belt from the seat.
ToolDescriptionFunctionValidity
1823015000KnifeRetainer removal
1. Release the door housing seals in the upper trim area.2. Undo the bolt.3. Remove pillar trim (3a) by releasing inner retainers (3b), then release it from seat belt (3c).
Refitting ( Removing ) - Check that the pillar trim is not damaged.- If removed, position the panel and attach the retainers.- Attach the seat belt to the pillar trim; place the pillar trim in position and attach the inner retainers.- Tighten the bolt.- Fit the door housing seals.1. Position the end of front seat belt (1a) on the seat and screw in bolt (1b), then tighten to the recommended torque.2. Position seat belt panel (2a) and do up retainers (2b).
ComponentFasteningdia  Value (daNm)Validity
Seat belt bracket on front seatBolt7/16”3.6 ÷ 4.4
    Op. 7040H36 CENTRE PILLAR LOWER ELEMENT (ONE), LEFT OR RIGHT - R.R     Op. 7040L48 FRONT AND REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.