323001628 - 1004E10 ENGINE, REMOVED - REMOVE CYLINDER HEAD AND OIL SUMP FOR INSPECTION - INCLUDES POSITIONING ON STAND AND REMOVAL

1. Turn the wrench clockwise on the auxiliary drivebelt tensioner.2. Remove the auxiliary drivebelt.
1. Undo bolts (1a) and remove timing side power unit rigid mount (1b).
1. Undo bolts (1a) and remove the protective timing covers.
1. Undo bolts (1a) and remove engine pulley (1b).
1. Adjust belt tensioner (1a) and remove timing belt (1b).
- Disconnect the electrical connection for the water temperature sensor.
DescriptionConnector
-Engine coolant temperature sensor/sender unit    See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT
- Disconnect the electrical connection for the timing sensor.
DescriptionConnector
-Timing sensor    See K047 TIMING SENSOR
- Disconnect the electrical connection for the ignition coil module.
DescriptionConnector
-Ignition coil    See A030 IGNITION COIL
- Disconnect the electrical connection for the throttle body.
DescriptionConnector
-Integrated throttle body actuator    See N075 BUILT-IN THROTTLE BODY ACTUATOR
- Disconnect the electrical connection for the knock sensor.
DescriptionConnector
-Knock sensor    See K050 DETONATION SENSOR
- Disconnect the air conditioner compressor engagement electrical connection.
DescriptionConnector
-Air conditioning compressor engagement solenoid    See L021 AIR CONDITIONING COMPRESSOR ENGAGEMENT SOLENOID VALVE
- Disconnect the earth lead from the crankcase.
DescriptionConnector
-Earth on engine    See C040 ENGINE EARTH
- Disconnect the electrical connection for the absolute pressure sensor.
DescriptionConnector
-Absolute pressure sensor    See K048 ABSOLUTE PRESSURE SENSOR
- Disconnect the electrical connection for the air pressure/temperature sensor.
DescriptionConnector
-Air pressure/temperature sensor    See K043 INTEGRATED AIR TEMPERATURE SENSOR
- Disconnect the electrical connection for the variable valve timing electromagnet.
DescriptionConnector
-Variable valve timing actuator    See N076 PHASE TRANSFORMER ACTUATOR
1. Undo bolts (1a) and remove injection control unit mount (1b).2. Undo bolts (2a) and remove timing sensor (2b).
1. Undo bolts (1a) and remove ignition coil module (1b).
1. Undo nuts (1a) and remove intake chamber (1b).
1. Undo bolts (1a) and remove tappet cover (1b).2. Undo bolts (2a) and remove cylinder head (2b).3. Remove the cylinder head gasket from the crankcase.4. Remove the locating bushes.
- Turn the engine through 180° on the overhaul stand.1. Undo nuts (1a) and bolts (1b) securing the sump to the crankcase.2. Remove the sealant using tool (2a) and remove engine oil sump (2b).
ToolDescriptionFunctionValidity
1870718000BladeCut sealant