323001898 - 1092C10 POWER STEERING AND/OR SELF-LEVELLING SUSPENSION PUMP DRIVE BELT - R + R

Removing ( Refitting )     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. 1. Undo the two bolts securing the pulley.2. Undo nut (2a) and then adjustment screw (2b) until the belt is loosened.3. Remove the power steering pump drive belt. Refitting ( Removing ) - Check the condition of the power steering drive belt.- Fit the power steering drive belt.- Operate the adjustment screw to increase or decrease the belt tension.- Use tool (1a) and check that the tension of the new belt is between 36 and 45 daN.

Tool	Description	Function	Validity
1895762000	Torque wrench	Check on alternator drive belt tension	1.4 8v

- Screw in and tighten the two bolts securing the pulley tensioner.- Tighten the adjustment screw nut.- Run the engine for 10 - 15 minutes and with the engine cold check that the belt tension is within the specified values.

Measurement	Value	Validity
Power assisted steering belt/used belt tension (daN)	23 ÷ 30	1.4 8v

- Screw in and tighten the two bolts securing the pulley tensioner.- Tighten the pulley tensioner bolt to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Auxiliary drive belt moving tensioner	Bolt	M8	2.2 ÷ 2.7	1.4 8v

    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R