The vehicle is equipped with two dipped beams in the headlights. The dipped beams are activated by turning a wheel on the stalk switch to the next position after the side light setting.The switching on of the low beams is managed by the Body Computer.A relay in the junction unit under the dashboard controls activation of the dipped beam headlamps via two lines protected by dedicated fuses. The dipped beam headlamps activation relay is controlled by the Body Computer. The energizing of the relay takes place by means of a dedicated Body Computer control signal.The activation of the dipped headlamps also involves the side lights and the number plate lights coming on simultaneously.The lights are only activated if the key is in the ON position. The dipped headlamps are deactivated when the key is turned to the OFF position or extracted.The follow me home function allows the dipped headlights and the side lights to remain on even after the engine has been switched off (key in OFF position) for a period of 30 seconds or multiples thereof. The lights being kept on is signalled by the side lights warning light in the instrument panel coming on together with the message in the display for as long as the function remains activated. It is turned on using the lever in the same way as for activating the flasher within 2 minutes of the key being switched to OFF or removed: each time the lever is operated, the period for which the lights are on is increased by 30 seconds to a maximum of 210 seconds. The function is deactivated if the key is switched to ON or if the flasher lever is operated for more than 2 seconds.The activation of the dipped beam headlamps allows the rear fog lights to be switched on using the control in the left control panel, and the orientation of the headlamps to be adjusted using the buttons in the same panel. See E2031 REAR FOG LAMPS See E3080 HEADLAMP AGLINMENT CORRECTOR