7045D31 FRONT SEAT BACKREST COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED - Fiat - LINEA - eLearn

323000694 - 7045D31 FRONT SEAT BACKREST COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED

) Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R. Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R 1. Open zip fastener (1a) along entire section (1b).2. Disconnect the lower two ends of the backrest trim attached to one another.3. Raise the backrest trim as far as possible.

1. Undo retainers (1a) and withdraw head restraint bushes (1b).2. Remove the backrest trim with padding (2b) from seat frame (2a).

- If necessary, separate the backrest trim from the padding, as described below.1. Prise up the trim by releasing from the padding edge.2. Use cutters to cut all the front backrest trim retainers.3. Separate trim (3a) from padding (3b).

Refitting ( Removing

) - Check that the backrest trim is not damaged.- If removed, position the backrest trim on the padding and crimp the retainers using special pliers.

Mould the cover on the padding during the various refitting stages.

- Fit the trim on the upper padding area.- Place the head restraint bushes in position and attach the retainers.

Both head restraint bushes have different retainers and engagement seats.

- Position the padding on the seat frame and fit the backrest trim on the padding.- Connect the lower two ends of the backrest trim.- Close the zip fastening along the entire length. Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R.