323001159 - 1092A10 CRANKSHAFT PULLEY - R + R

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 1092B84 WATER PUMP/ALTERNATOR/AIR CONDITIONING COMPRESSOR DRIVE BELT - R.R.1. Fit a suitable (6 mm diameter) pin via the special opening in the gearbox, to be used for counter-torque.

Check that the pin is correctly inserted in the housing in the flywheel.

1. Undo bolts (1a) and remove crankshaft pulley (1b). Refitting ( Removing ) - Position the crankshaft pulley in its housing and secure it by tightening the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Services pulley on crankshaft	Bolt	M8	2.3 ÷ 2.8

- Remove the pin from the opening in the gearbox.    Op. 1092B84 WATER PUMP/ALTERNATOR/AIR CONDITIONING COMPRESSOR DRIVE BELT - R.R.    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R - Remove the vehicle from the lift.