323001543 - 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR

Removing ( Refitting ) 1. Unscrew the three nuts.- Extract the lock.- Remove the rod from its housing.- Remove the lock. Refitting ( Removing ) - Check that the lock is not damaged.- Connect the rod to the two retainers.- Position the lock and screw in the bolts with the nuts without tightening them.1. Adjust the position of the lock.

NOTE: The arrows indicate the possible movements.

2. Tighten the bolts with nut.

Component	Fastening	dia	Value (daNm)	Validity
Bonnet striker	Bolt	M6	0.6 ÷ 1.0

- Check that the bonnet opens and closes properly.