7050A19 REAR SEAT BACKREST - R.R - Fiat - LINEA - eLearn

323001839 - 7050A19 REAR SEAT BACKREST - R.R

) Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R. 1. Raise the sides of the upper coupling device until the backrest is released.- Lower the backrest.

1. Working at the rear of the backrest, undo bracket retaining bolt (1a).2. Working at the front of the backrest, undo the two bracket retaining bolts (2a).

1. Working at the rear of the backrest, undo retaining bolts (1) securing the backrest to the body.- Remove the backrest by releasing it from its housing.

Refitting ( Removing

) - Check that the backrest is not damaged.- Position the backrest and attach the side retainers in the housings.- Screw in the backrest link retaining bolts and tighten to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Rear seat backrest bracket	Bolt	M10	3.15 ÷ 3.85

- Refit the luggage compartment load platform trim.- Lift up the backrest and attach the side retainers.- Lower the rear seat cushion into place. Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R.