323001840 - 7025B10 BOOT LID - ALIGNMENT
Removing
(
Refitting
)
- Open the boot.1. Loosen the bolts.
Refitting
(
Removing
)
- Adjust the position of the boot.- Close the boot.- Check the alignment of the boot.- Open the boot.- Tighten all the bolts to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Boot lid telescopic strut ball joint pin | - | M8 | 2.25 ÷ 2.75 |