Removing
(
Refitting
)
- Move the corresponding front seat as far forward as necessary.1. Undo the bolt.2. Remove cushion (2a), releasing pin (2b) from housing (2c).
Refitting
(
Removing
)
- Check that the cushion is not damaged.1. Fit the cushion in place, attaching the pin in the housing.2. Tighten the bolt.
Component
Fastening
dia
Value (daNm)
Validity
Rear seat cushion
Bolt
M8x22.5
2.25 ÷ 2.75
- Place the corresponding front seat in the middle position.
Removing
(
Refitting
)
- Move the corresponding front seat as far forward as necessary.1. Undo the bolt.2. Remove cushion (2a), releasing pin (2b) from housing (2c).
