323002074 - 7025B58 BOOT LID LOCK STRIKER - R+R
Removing
(
Refitting
)
Op. 7040B22 LUGGAGE COMPARTMENT/LOAD PLATFORM MOULDING - R+R 1. Undo the two bolts securing the striker.2. Remove the striker, disengaging the rod from its housing.
Refitting
(
Removing
)
- Check that the striker is not damaged.- Position the striker and screw in the retaining bolts without tightening them.1. Adjust the striker position. Tighten the bolts. The arrows indicate the possible movements.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Boot lid lock striker | Bolt | M6 | 0.6 ÷ 1.0 |
