323003619 - 2127C44 PRESSURE ACCUMULATOR ON HYDRAULIC ACTUATOR UNIT - R.R.

Removing ( Refitting ) - Place the gear lever in N.- Connect an Examiner and run the depressurization procedure.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 1008B30 GEARBOX SIDE SUPPORT FLEXIBLE MOUNTING(S) - REPLACE     Op. 1008A42 POWER UNIT RIGID SUPPORT - GEARBOX SIDE - R.R. 1. Undo the pressure accumulator complete with O-ring and remove it. Refitting ( Removing ) - Tighten the pressure accumulator complete with a new O-ring to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Pressure accumulator	Connector	-	0.8	1.3 Multijet MTA

    Op. 1008A42 POWER UNIT RIGID SUPPORT - GEARBOX SIDE - R.R.     Op. 1008B30 GEARBOX SIDE SUPPORT FLEXIBLE MOUNTING(S) - REPLACE     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T47 HYDRAULIC SYSTEM FLUID FOR GEARBOX WITH HYDRAULIC SELECTION CHECK LEVEL AND TOP UP, IF NECESSARY     Op. 0010T48 HYDRAULIC SYSTEM FOR GEARBOX WITH HYDRAULIC SELECTION - BLEED AIR     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.