323000628 - 7010A10 REAR SIDE DOOR - ADJUST STRIKER AND ADAPT SEAL IF NECESSARY

- Check that the front door is aligned, otherwise:    Op. 7005A10 FRONT SIDE DOOR - ADJUST STRIKER AND ADAPT SEAL IF NECESSARY - Open the rear door.1. Check that the door housing seal is not damaged along its perimeter, otherwise replace.2. Check that the door seal join (2a) is in line with the front (2b) of the running board.3. If necessary, loosen bolts (3a) and move lock striker (3b) to the correct position using the slotted bolt holes. The arrows indicate the possible movements for the adjustment.
1. Tighten the bolts to the specified torque.
Component Fasteningdia  Value (daNm)Validity
Door lock strikerBoltM82.25 ÷ 2.75
- Check that the stiker and the door lock are correctly matched and that the alignment is correct with the door closed.