323000812 - K062 ABS AND HANDBRAKE WARNING LIGHTS BOTH ON
With the ignition on, the ABS warning light and the handbrake warning light come on simultaneously and stay on for longer than 3 seconds (both warning lights should go off after the initial control unit test) | If it comes on at the same time as the ABS warning light, the low brake fluid level and handbrake warning light also indicates an EBD fault. |
 | Under these circumstances, the rear wheels may lock and the vehicle may skid if the brakes are operated because the system EBD function is temporarily deactivated. If it comes on alone, this means that the handbrake is on or the brake fluid level is too low |
| TEST RESULTS | ||||
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
| Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket.Check that there are no faults in the ABS control unit | Move on to Step 2 | 1. Error detected in the control unit2. No communication with the control unit | 1. Continue following the instructions on the diagnostic equipment2. Restore the connection between the ABS control unit and the diagnostic connector See E7020 ABS | |