323000819 - K082 PASSENGER AIR BAG DISABLED WARNING LIGHT ON

On starting, the passenger Air Bag disabled warning light comes on and remains on for longer than 4 seconds (execution of control unit initial test)

Check in the set up menu that the switch is in the OFF position; the warning light should remain on.

The warning lights take the form of LEDs built into the electronic circuit and are NOT therefore replaceable

		TEST RESULTS
0	KEY/SWITCH POSITION CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check in the set up menu that the passenger Air Bag exclusion is not activated.	Move on to Step 1	Passenger Air Bag exclusion activated	Restore the correct setting.
1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket.Check:- for faults in the Air Bag control unit;- the plausibility of all the parameters	Move on to Step 2	1. No communication with the control unit2. Error detected in the control unit	1. Restore:a) connection between the Air Bag control unit and diagnostic connector;b) Air Bag control unit power supply    See E7030 AIRBAG 2. Continue following the instructions on the diagnostic equipment
2	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check, in active diagnosis, that the passenger Air Bag disabled warning light is working correctly.	Move on to Step 3	Warning light does not flash	Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R
3	CORRECT OPERATION CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check whether the fault persists.	End of diagnosis	The fault persists	Replace the Air Bag control unit    Op. 5580C14 AIR BAG ECU - R+R