323001225 - 1060G90 SYSTEM CABLE LOOM - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R     Op. 5520C20 HEATER PLUGS CONTROL UNIT - R.R 1. Undo nut (1a) and disconnect electrical connection (1b) for the alternator.
DescriptionConnector
1Alternator    See A010 ALTERNATOR
2. Open protective cover (2a) and disconnect electrical connection (2b) for the starter motor.
DescriptionConnector
2bStarter motor    See A020 STARTER MOTOR
1. Disconnect the electrical connection for the air conditioning compressor engagement solenoid.
DescriptionConnector
1Air conditioning compressor engagement solenoid    See L021 AIR CONDITIONING COMPRESSOR ENGAGEMENT SOLENOID VALVE
1. Detach the rpm sensor electrical connection.
DescriptionConnector
1Rpm sensor    See K046 RPM SENSOR
1. Detach the air temperature sensor electrical connection.
DescriptionConnector
1Engine coolant temperature sensor/sender unit    See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT
1. Disconnect the electrical connection for the fuel pressure regulator on the pressure pump.
DescriptionConnector
1Fuel pressure regulator    See N077 FUEL PRESSURE REGULATOR
2. Disconnect the electrical connection for the EGR solenoid.
DescriptionConnector
2EGR solenoid    See L030 EGR SOLENOID VALVE
1. Detach the fuel pressure sensor electrical connection.
DescriptionConnector
1Fuel pressure sensor    See K083 FUEL PRESSURE SENSOR
2. Detach the excess pressure sensor electrical connection.
DescriptionConnector
2Turbocharging sensor    See K082 SUPERCHARGING SENSOR
1. Disconnect the electrical connection for the engine oil pressure warning light switch.
DescriptionConnector
1Insufficient engine oil pressure sensor    See K030 ENGINE OIL PRESSURE SENSOR (SWITCH)
2. Disconnect the glow plug electrical connections.
DescriptionConnector
2Glow heater plugs    See A040 HEATER PLUGS
3. Disconnect the electrical connection for the injectors.
DescriptionConnector
3Injector    See N070 INJECTOR
4. Detach the timing sensor electrical connection.
DescriptionConnector
4Timing sensor    See K047 TIMING SENSOR
5. Undo the bolts, open the clips and move the wiring to the side.
1. Disconnect the electrical connection for the turbocharger vane adjustment actuator control solenoid.
DescriptionConnector
1Turbine variable geometry control solenoid    See L036 TURBINE VARIABLE GEOMETRY CONTROL SOLENOID VALVE
1. Disconnect the engine wiring coupling.
DescriptionConnector
1Engine cables/engine services cable coupling    See D029 ENGINE CABLES/ENGINE SERVICES CABLE COUPLING
2. Disconnect the electrical connection for the injection control unit.
DescriptionConnector
2Engine management control unit    See M010 ENGINE MANAGEMENT ECU
- Release the cable loom from the air capacity chamber fastening bands and remove it. Refitting ( Removing ) - Place the cable loom in its housing and secure it using the bands.- Connect the electrical connection for the injection control unit.- Connect the engine wiring coupling.- Connect the electrical connection for the turbocharger vane adjustment actuator control solenoid.- Secure the electrical connection for the timing sensor.- Connect the electrical connection for the injectors.- Connect the glow plug electrical connections.- Connect the electrical connection for the engine oil pressure warning light switch.- Secure the electrical connection for the excess pressure sensor.- Connect the electrical connection for the fuel pressure sensor.- Connect the electrical connection for the EGR solenoid.- Connect the electrical connection for the fuel pressure regulator on the distribution manifold (rail).- Connect the electrical connection for the fuel pressure regulator on the pressure pump.- Attach the electrical connection for the water temperature sensor.- Secure the electrical connection for the rpm sensor.- Connect the electrical connection for the glow heater plugs control unit.- Connect the electrical connection for the air conditioning compressor.- Connect the electrical connection for the starter motor and close the protection.- Connect the electrical connection for the alternator.- Remove the vehicle from the lift.    Op. 5520C20 HEATER PLUGS CONTROL UNIT - R.R     Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R