| | Test results |
| 1 | CHECK USING THE EXAMINER | All OK | Problems encountered | Operation |
|---|
| Check for the presence of any faults by connecting to the engine management control unit using the Examiner. | Move on to Step 2. | Presence of errors. | Continue as instructed by the diagnostic equipment. |
| 2 | ALTERNATOR CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the alternator is working properly. See E5010 STARTING AND RECHARING | Move on to Step 3. | 1. Alternator voltage too low.2.Alternator defective. | 1. Replace the voltage regulator. Op. 5530A24 ALTERNATOR VOLTAGE REGULATOR - R.R. WITH ALTERNATOR REMOVED 2. Replace the alternator. Op. 5530A14 ALTERNATOR - R+R FOR VERSIONS WITH AIR CONDITIONOMG |
| 3 | ENGINE COOLANT TEMPERATURE SENSOR CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the engine coolant temperature sensor is working properly. See Test 5030AA WATER TEMPERATURE SENSOR CHECK | Move on to Step 4. | 1. Temperature measured too low.2.Sensor wiring defective. | 1. Replace the temperature sensor.2.Restore correct wiring. |
| 4 | ACCELERATOR PEDAL SENSOR CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the accelerator pedal is correctly positioned.Using the Examiner, check that the accelerator pedal is working properly. | End of diagnosis. | 1.Accelerator pedal incorrectly positioned.2.Accelerator pedal sensor defective. | 1.Position the accelerator pedal correctly.2.Replace the accelerator pedal. Op. 1068A20 ACCELERATOR PEDAL WITH BUILT-IN POTENTIOMETER - R.R |