323001748 - F010 EXCESSIVE BRAKE PEDAL FREE PLAY

When the brake pedal is pressed, the travel is greater than normal
TEST RESULTS
0PRELIMINARY CHECKSALL OKPROBLEMS ENCOUNTEREDACTION
First of all check whether the problem is accompanied by poor braking action.Move on to Step 1There is also poor braking action.Proceed as instructed in the diagnosis    See table F001 POOR BRAKING ACTION
1FLUID LEAKS CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Visually inspect for fluid leaks in the braking system circuit.Move on to Step 21. Fluid leak detected.2. Component defective.1. Retighten connectors2. Replace the defective component.
2FLUID LEAKS FROM BRAKE PUMP CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Disconnect the check valve connector from the brake servo and introduce a pipe cleaner in order to reach the lowest part of the brake servo chamber. Check that there is no fluid in the chamber.Move on to Step 3Fluid in the brake servo chamber.Replace brake servo    Op. 3330D02 BRAKE SERVO/BRAKE PUMP ASSEMBLY - R.R.
3AIR IN THE CIRCUIT CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check for any air in the braking circuit.Move on to Step 4Air in the circuit.Bleed the air from the system    Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR
4CLEARANCE BETWEEN DRUM AND SHOES CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the clearance between the shoes and the drum, measuring the difference between the diameter of the drum and the diameter of the brake measured on the centred shoe centre line.Move on to Step 6Drum / shoe clearance not correct.Move on to Step 5
5SELF-ADJUSTMENT DEVICE CORRECT OPERATION CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the operation of the self-adjustment device, activating it several times.Move on to Step 6Incorrect operation of self-adjustment device.Replace the self-adjustment device.
6CORRECT OPERATION CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer present.End of diagnosisThe fault is still present.Check the operation of the other parts of the braking system (calliper, pipes, brake pump).