323002124 - 1088C40 THERMOSTAT- R + R

Removing ( Refitting )     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 0010T20 ENGINE COOLANT - CHANGE     Op. 1048A10 AIR FILTER ASSEMBLY - R.R. 1. Loosen the band (1a) and disconnect the flexible hose (1b) from the rigid pipe carrying engine oil vapour (1c) to the turbocharger intake.2. Loosen the band (2a) and disconnect the hose (2b) for the engine oil heat exchanger water delivery pipe from the thermostat.3. Undo the bolts (3a) and move the rigid engine oil vapour supply pipe (1c) to the turbocharger intake.4. Loosen the band and disconnect the delivery pipe to the radiator from the thermostat. 1. Detach the air temperature sensor electrical connection.

	Description	Connector
1	Engine coolant temperature sensor/sender unit	See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT

2. Loosen the band and disconnect the degassing pipe (2a) from the thermostat (2b).3. Loosen the band and disconnect the water delivery pipe to the EGR heat exchanger from the thermostat.4. Undo the bolts and remove the thermostat (2b). Refitting ( Removing ) - Refit the thermostat in its seat and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Thermostat	Bolt	M8	2.2 ÷ 2.7	1.3 Multijet

- Connect the flexible water supply pipe to the EGR heat exchanger to the thermostat.- Connect the degasing pipe to the thermostat.- Attach the electrical connection for the water temperature sensor.- Connect the delivery pipe to the radiator to the thermostat.- Refit the rigid pipe carrying engine oil vapour to the turbocharger in its housing and secure it using the bolts.- Connect the water delivery pipe sleeve for the engine oil heat exchanger to the thermostat.- Connect the hose to the rigid pipe carrying engine oil vapour to the turbocharger intake.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R     Op. 0010T20 ENGINE COOLANT - CHANGE