323000035 - 4130B40 SUPPLY PIPE FROM PUMP TO POWER STEERING BOX - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.- Disconnect the negative battery terminal.1. Empty the reservoir using the special syringe.2. Undo connector on pump (2a).- Raise the vehicle.- Position a suitable container to collect the brake fluid.3. Undo the bolt-connector (3a) on the power steering box (3b).4. Release the pipe from retainers (4a) and remove it. Refitting ( Removing ) - Check that the pipe is not damaged.- Position the pipe and tighten the retainers.- Screw in the bolt-connector on the power steering box and tighten to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Oil filler for high pressure pipe on power steering box	-	-	3.6 ÷ 4.4

- Lower the vehicle.- Screw in the connector on the pump and tighten to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Filler on power steering pump	-	M16	3.6 ÷ 4.4	1.4 8v1.3 Multijet

    Op. 0010T71 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY - Connect the negative battery terminal (-).- Remove the vehicle from the lift.