323000674 - 7045A18 FRONT SEAT BACKREST ASSEMBLY (ONE), LEFT OR RIGHT - R.R.

Removing ( Refitting )     Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.     Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R     Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R.     Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R     Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R     Op. 5580C44 FRONT SIDE BAG MODULE (ONE) LH OR RH - R.R 1. Working in the side Air Bag module housing, cut the wiring retaining band.2. Refit wiring (2a) inside opening (2b).
1. Disconnect electrical connections (1a), (1b), working at the rear of the backrest.2. Disconnect the retainer for the electrical connection from the lumbar band.3. Cut the band securing the wiring to the lumbar band.4. Release the wiring retainer.5. Extract backrest wiring branch (5a) from opening (5b).
Refitting ( Removing ) - Check that the backrest is not damaged.1. Position the backrest.2. Tighten the backrest bolts.
ComponentFasteningdia  Value (daNm)Validity
BackrestBolt-5.4 ÷ 6.6
- Insert the backrest wiring branch via the opening.- Attach the wiring retainer.- Fit the wiring retaining band.- Connect the electrical connection to the retainer.- Connect the electrical connections for the backrest heater pad and lumbar adjustment motor.- Pass the wiring inside the opening.- Working in the Side Bag module housing, fit the wiring retaining band.    Op. 5580C44 FRONT SIDE BAG MODULE (ONE) LH OR RH - R.R     Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R     Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R     Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R.     Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R     Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R. - After refitting the seat, use an Examiner to check that the system has not acquired errors during the operation.