323000677 - 7045A38 DRIVER'S SEAT BACKREST LUMBAR ADJUSTMENT DEVICE - R.R WITH SEAT REMOVED
Removing ( Refitting ) Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R. Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045D31 FRONT SEAT BACKREST COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED 1. Remove the front rivets securing the Air Bag frame using a drill.2. Move the free part of the Air Bag frame slightly.
1. Remove the rivets securing the lumbar band using a drill.2. Disconnect the cable terminals from the retainers.
1. Cut the wiring retaining band.2. Detach the electrical connection.3. Undo the lumbar adjustment motor retaining bolts.4. Remove the lumbar adjustment device.
Refitting
(
Removing
)
- Check that the lumbar adjustment device is not damaged.- Place the lumbar adjustment device in position.- Tighten the lumbar adjustment motor retaining bolts.- Secure the electrical connection for the motor.- Fit the wiring retaining band.- Connect the cable terminals to the retainers.- Fit the lumbar band rivets.
Fit rivets of the same size as those removed. |
Fit rivets of the same size as those removed. |