323000692 - 7045D21 FRONT SEAT CUSHION COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED
Removing ( Refitting ) Op. 7045A24 FRONT SEAT BACKREST ANGLE ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R. Op. 7045A56 DRIVER'S SEAT HEIGHT ADJUSTMENT DEVICE CONTROL LEVER - R.R Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R 1. Disconnect front retainer (1a) of the cushion trim from seat frame profile (1b).2. Release side retainers (2a) by undoing tabs (2b).3. Release rear part (3a) of cushion trim from retainers (3b).4. Remove the cushion with padding.
- If necessary, separate the cushion trim from the padding as indicated below.1. Prise up the trim and release it from the padding border.2. Use cutters to cut all the upper cushion trim retainers.3. Separate trim (3a) from padding (3b).
Refitting
(
Removing
)
- Check that the cushion trim is not damaged.- If removed, position the cushion trim on the padding and crimp the retainers using special pliers.
Mould the trim on the padding during the various refitting stages. |