323000881 - 1084A42 ENGINE OIL PRESSURE WARNING LIGHT SWITCH - R + R

Removing ( Refitting ) - Disconnect the negative battery terminal.1. Disconnect the electrical connection for the engine oil pressure warning light switch.

	Description	Connector
1	Insufficient engine oil pressure sensor	See K030 ENGINE OIL PRESSURE SENSOR (SWITCH)

2. Undo and remove the engine oil pressure warning light switch from the cylinder head. Refitting ( Removing ) - Replace the engine oil pressure warning light switch in its housing and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Switch for engine oil pressure warning light	-	M14	2.9 ÷ 3.5

- Connect the negative battery terminal (-).