1. Remove the protective plug and connect the recovery device (pipe and reservoir) to the clutch hydraulic actuator bleed tap.2. Lift clip (2a) until the first click is heard (bleed tap open), then move fluid pipe (2b) back.- Open the equipment fluid reservoir tap slowly.- Wait for all the air in the hydraulic clutch release system to escape.- Push the oil pipe toward the hydraulic clutch actuator and lock with the clip.- Close the bleed tap on the hydraulic clutch actuator and refit the protective cap in its seat.
- Remove the recovery device (pipe and reservoir)- Remove the brake-clutch bleed equipment.- Check that the clutch disengages and that the gears engage properly.- Check the fluid level in the brake-clutch reservoir is correct. Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 5530B10 BATTERY - R+R
