1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE - Fiat - LINEA - eLearn

323001141 - 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE

) - Disconnect the negative battery terminal.- Position an arm lift underneath the engine.1. Undo the coolant reservoir and detach the degassing pipe, placing it all to one side.

1. Undo the bolts securing the flexible mounting to the bodyshell.2. Undo the nuts fixing the flexible mounting to the rigid engine support.3. Remove the flexible mounting.

Refitting ( Removing

) - Place the flexible block back in its housing.- Tighten the bolts fixing the flexible block to the rigid support to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Timing side power unit to rigid support flexible mounting	Bolt	M12	9.0 ÷ 11.0	1.3 Multijet

- Tighten the bolts fixing the flexible block to the body to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Timing side power unit flexible mounting to bodyshell	Bolt	M10	6.3 ÷ 7.7	1.3 Multijet

- Reposition the coolant reservoir, connecting the degassing pipe.- Remove the hydraulic jack from underneath the engine.- Connect the negative battery terminal (-).