323001219 - 1060G14 ENGINE COOLANT TEMPERATURE SENSOR - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 0010T20 ENGINE COOLANT - CHANGE     Op. 5530B10 BATTERY - R+R     Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R 1. Undo the bolts securing the rigid engine oil vapour recirculation pipe.2. Loosen the band and disconnect the engine oil vapour recirculation hose from the rigid pipe. 1. Disconnect the electrical connection for the engine coolant temperature sensor.

	Description	Connector
1	Engine coolant temperature sensor/sender unit	See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT

2. Undo the engine coolant temperature sensor and remove it. Refitting ( Removing ) - Place the engine coolant temperature sensor in its housing and tighten it to the recommended torque.

Renew the sealant on the sensor thread.

Component	Fastening	dia	Value (daNm)	Validity
Engine coolant temperature sensor	-	M16	1.8 ÷ 2.2	1.3 Multijet

- Secure the electrical connection to the engine coolant temperature sensor.- Connect the engine oil vapour recirculation hose to the rigid pipe and tighten the band.- Tighten the bolts securing the rigid engine oil vapour recirculation pipe.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R     Op. 5530B10 BATTERY - R+R - Connect the radiator lower coolant outlet hose, radiator side, and tighten the band.    Op. 0010T20 ENGINE COOLANT - CHANGE - Remove the vehicle from the lift.