323001275 - 1020B30 TIMING COVER OIL SEAL - REPLACE

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.     Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R 1. Remove the plug (1a) and replace it with the tool (1b) on the exhaust side camshaft.
Fit the tool positioning it with the millings horizontal and checking that it is correctly inserted in the housing in the camshaft.
ToolDescriptionFunctionValidity
1871000900TemplateEngine tuning1.3 Multijet
2. Fit a suitable (6 mm diameter) pin via the special opening in the gearbox.
Check that the pin is correctly inserted in the housing in the flywheel.
    Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 1092B84 WATER PUMP/ALTERNATOR/AIR CONDITIONING COMPRESSOR DRIVE BELT - R.R.    Op. 1092A10 CRANKSHAFT PULLEY - R + R 1. Using the tools (1a) and (1b) for counter-torque, unscrew the left-threaded bolt (1c) fixing the pulley mounting flange to the crankshaft.
ToolDescriptionFunctionValidity
1871000200Counter-torqueLock crankshaft1.3 Multijet
ToolDescriptionFunctionValidity
1860831000Support for counter-torqueLock crankshaft1.3 Multijet
2. Remove the pulley support flange on the crankshaft.
1. Remove the crankshaft front oil seal from the crankcase front cover.
Take care not to damage the oil seal seat when removing it.
Refitting ( Removing ) 1. Fit the a new crankshaft front oil seal (1a) in its seat on the timing cover using the tool (1b).
ToolDescriptionFunctionValidity
1860878000Fitting toolFitting crankshaft front oil seal1.3 Multijet
- Refit the pulley mounting flange to the crankshaft and tighten the left-threaded bolt to the specified torque using the tools as countertorque.
ComponentFasteningdia  Value (daNm)Validity
Pulley support flange on crankshaftLeft hand boltM144.7 ÷ 5.2 + 75° ± 3°1.3 Multijet
ToolDescriptionFunctionValidity
1871000200Counter-torqueLock crankshaft1.3 Multijet
ToolDescriptionFunctionValidity
1860831000Support for counter-torqueLock crankshaft1.3 Multijet
    Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1092B84 WATER PUMP/ALTERNATOR/AIR CONDITIONING COMPRESSOR DRIVE BELT - R.R.    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R - Remove the peg from the opening in the gearbox.- Remove the exhaust camshaft timing tool and tighten the plug.    Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R     Op. 1048A10 AIR FILTER ASSEMBLY - R.R. - Remove the vehicle from the lift.