5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R. - Fiat - LINEA - eLearn

323001444 - 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.

) Op. 7040A30 LEFT LOWER DASHBOARD TRIM - R.R.1. Disconnect the 5 electrical connections present.

	Description	Connector
1	BODY COMPUTER	See M001 BODY COMPUTER

2. Undo the four bolts fastened to the dashboard.3. Extract the support.

1. Move the body computer assembly slightly.2. Disconnect the three retainers for the rear connector and release them.

	Description	Connector
2	BODY COMPUTER	See M001 BODY COMPUTER

3. Recover the body computer assembly.

Refitting ( Removing

) - Check that the body computer assembly is not damaged.- Connect the rear electrical connections.- Position the body computer assembly and tighten the bolts.- Connect the front electrical connections.- Position the wiring multistrip and close.- Position the diagnostic socket mount.- Tighten the bolts or fit the rivets.- If the body computer is being replaced, proceed as follows.

If the Body Computer is being replaced, an identical copy of the Body Computer must be obtained from the Parts Dept. as a V.O.R. order, quoting the vehicle chassis number: this copy will contain all the default settings entered when the vehicle was new which are stored in the Parts Dept. database for the vehicle chassis number.

- If the same body computer that was removed is being refitted on the vehicle, use the Examiner to check that the system has not picked up errors during the operation.- Test the operation of the electrical system. Op. 7040A30 LEFT LOWER DASHBOARD TRIM - R.R.