1088B24 ENGINE COOLING RADIATOR - R.R. FOR AIR CONDITIONED VERSIONS - Fiat - LINEA - eLearn

323001517 - 1088B24 ENGINE COOLING RADIATOR - R.R. FOR AIR CONDITIONED VERSIONS

) - Position the vehicle on a lift.- Disconnect the negative battery terminal. Op. 7210E10 R.R. FRONT BUMPER Op. 0010T20 ENGINE COOLANT - CHANGE 1. Disconnect lower radiator coolant outlet hose (1a) and (1b).

1. Loosen the band and disconnect the radiator upper coolant inlet hose, radiator side.- Raise the car and position the hydraulic strut under the radiator.- Undo the bolts and release the condenser from the radiator and secure to the headlights crossmember.- Unscrew the bolt on the turbocharging air-air exchanger, releasing it and securing it as necessary.

1. Disconnect the resistor electrical connection.

	Description	Connector
1	Engine fan adjustment resistance	See O010 ENGINE FAN ADJUSTMENT RESISTANCE - 1

Op. 1088B32 ENGINE COOLING RADIATOR SUPPORTING CROSSMEMBER - R.R. Op. 1088B29 ENGINE COOLING RADIATOR SUPPORT (1), LH OR RH - R R - Lower the hydraulic strut.1. Remove the radiator unit with fans.2. Remove the two split pins (2a) and (2b) to separate the fan from the radiator.

Refitting ( Removing

) - Refit the radiator fan in its seat and secure it using the split pins.- Position the radiator in its housing, complete with fan, using the hydraulic strut for support. Op. 1088B29 ENGINE COOLING RADIATOR SUPPORT (1), LH OR RH - R R Op. 1088B32 ENGINE COOLING RADIATOR SUPPORTING CROSSMEMBER - R.R.- Position the turbocharging air-air exchanger in its housing and tighten the retaining bolt.- Position the condenser to the radiator, reattaching it and tightening the four bolts.- Remove the hydraulic strut from below the radiator.- Lower the vehicle.- Connect the dimmer electrical connection.- Connect the electrical connection for the fan.- Connect the radiator upper coolant inlet hose.- Connect the two radiator lower coolant outlet hoses and tighten the associated band. Op. 0010T20 ENGINE COOLANT - CHANGE Op. 7210E10 R.R. FRONT BUMPER - Connect the negative battery terminal (-).- Remove the vehicle from the lift.