323001827 - 7055A81 BADGE ON BOOT LID - R R

Removing ( Refitting ) 1. Using a plastic blade, remove badge (1a) by unsticking double-sided tape (1b) around the perimeter and releasing centring pins (1c). Refitting ( Removing ) - Check that the badge is not damaged.1. Clean the housing for the badge, removing the residual adhesive and degrease with heptane.2. Remove protective film (2a) for the double-sided tape and place badge (2b) in position; engage retainers (2c) and fit it.

This operation should be carried out at a temperature above 20°C.