323001898 - 1092C10 POWER STEERING AND/OR SELF-LEVELLING SUSPENSION PUMP DRIVE BELT - R + R

Removing ( Refitting ) - Position the vehicle on a lift.- Disconnect the negative battery terminal.1. Undo the two bolts (1a) for belt guard (1b) and extract it.- Raise the vehicle.    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. 2. Rotate pulley (2a), prise up belt (2b) and extract it.
Refitting ( Removing )
The belt is flexible and should be replaced each time it is removed. A special tool is required for fitting it.
- Position the belt on the pulley and fit it using an ordinary fitting tool.    Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. - Lower the vehicle.- Position the belt guard and tighten the two bolts.- Connect the negative battery terminal (-).- Remove the vehicle from the lift.