323001999 - 7210A15 R.R. FRONT WING/HEADLAMP HOUSING CROSSMEMBER

Removing ( Refitting )     Op. 7210E10 R.R. FRONT BUMPER     Op. 5540B07 LEFT FRONT HEADLAMP - R.R     Op. 5540B08 RIGHT FRONT HEADLAMP - R.R     Op. 5580C10 DECELERATION SENSOR FOR AIR BAG (ONE), L/H OR R/H - R+R     Op. 7025A53 STRIKER FOR BONNET LID SAFETY OPENING DEVICE - R.R.1. Unscrew the bolts on both sides.
1. Remove the coolant reservoir (1a) undoing the two bolts (1b) (petrol versions only).2. Remove the pipe for topping up the screen washer fluid, removing the fastening rivet (2a) (petrol versions only).
1. Remove the crossmember.
Refitting ( Removing ) - Check that the crossmember is not damaged.- Reposition the crossmember in its housing.- Reposition the coolant reservoir tightening the two bolts and the pipe for topping up the screen washer fluid, securing it using the rivet (petrol versions only).- Tighten the side bolts on both sides of the crossmember.
ComponentFasteningdia  Value (daNm)Validity
Front sacrificial beamBoltM10x1.5x28.53.2 ÷ 3.8
ComponentFasteningdia  Value (daNm)Validity
Headlamp holder crossmember to bodyshellBoltM82.0 ÷ 2.7
    Op. 7025A53 STRIKER FOR BONNET LID SAFETY OPENING DEVICE - R.R.    Op. 5580C10 DECELERATION SENSOR FOR AIR BAG (ONE), L/H OR R/H - R+R     Op. 5540B08 RIGHT FRONT HEADLAMP - R.R     Op. 5540B07 LEFT FRONT HEADLAMP - R.R     Op. 7210E10 R.R. FRONT BUMPER