1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R. - Fiat - LINEA - eLearn

323002060 - 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.

) - Disconnect the negative (-) battery terminal. Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 4130B20 POWER STEERING PUMP - R.R. Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE 1. Release the lambda sensor connector.2. Undo the four bolts securing the rigid mount to the engine.3. Remove the power unit bracket.4. Remove the timing side power unit rigid mount from the vehicle.

Refitting ( Removing

) - Refit the rigid mount complete with bracket in its housing.- Tighten the four bolts securing the rigid mount to the engine to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Timing side power unit rigid support to engine block	Bolt	M10	5.7 ÷ 6.3	1.3 Multijet

- Reattach the lambda sensor connector. Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE Op. 4130B20 POWER STEERING PUMP - R.R. Op. 1048A10 AIR FILTER ASSEMBLY - R.R. - Connect the negative battery terminal (-).