323002070 - 7050D30 TRIM FOR REAR SEAT BACKREST - R.R.

Removing ( Refitting )     Op. 7050A19 REAR SEAT BACKREST - R.R 1. Remove the cover from its housing along the entire perimeter length of the backrest frame.- Keep the cover and the padding.
- If necessary, separate the backrest cover from the padding as described below.1. Prise up the cover by releasing from the padding edge.2. Use cutters to cut all the front backrest cover retainers.3. Separate cover (3a) from padding (3b).
Refitting ( Removing ) - Check that the backrest cover is not damaged.- If removed, position the backrest cover on the padding and crimp the retainers using special pliers.
ToolDescriptionFunctionValidity
1878017000CalliperSeat upholstery retainers
Mould the cover on the padding during the various refitting stages.
- Fit the cover around the edge of the padding.- Position the cover with padding on the seat frame.- Fold down the backrest.- Attach the backrest cover terminal profiles to the seats, around the edge of the backrest.    Op. 7050A19 REAR SEAT BACKREST - R.R