323002101 - 7050D37 RIGHT REAR SEAT BACKREST COVER (SINGLE) - R.R. WITH BACKREST REMOVED

Removing ( Refitting )     Op. 7050B12 REAR SEAT HEAD RESTRAINT - R.R.1. Remove the cover profile from its housing along the entire perimeter length of the backrest frame.- Keep the cover and the padding.
- If necessary, separate the backrest cover from the padding as described below.1. Prise up the cover by releasing from the padding edge.2. Use cutters to cut all the front backrest cover retainers.3. Separate cover (3a) from padding (3b).
1. Disengage the retainers and remove the head restraint guide bushes.
Refitting ( Removing ) - Check that the backrest cover is not damaged.- If removed, position the backrest cover on the padding and crimp the retainers using special pliers.
ToolDescriptionFunctionValidity
1878017000CalliperSeat upholstery retainers
Mould the cover on the padding during the various refitting stages.
- Fit the cover on the upper padding area.- Place the head restraint bushes in position and attach the retainers.
Both head restraint bushes have different retainers and engagement seats.
- Position the padding on the seat frame and fit the backrest cover on the padding.- Attach the cover terminal retainer to its seat on the structure.    Op. 7050B12 REAR SEAT HEAD RESTRAINT - R.R.