323002111 - 1084B12 ENGINE OIL PUMP - R+R
Removing
(
Refitting
)
Op. 5530B10 BATTERY - R+R Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 0010T20 ENGINE COOLANT - CHANGE Op. 0010T12 ENGINE OIL AND FILTER - REPLACE Op. 1048A10 AIR FILTER ASSEMBLY - R.R. Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 1092B84 WATER PUMP/ALTERNATOR/AIR CONDITIONING COMPRESSOR DRIVE BELT - R.R. Op. 1092A10 CRANKSHAFT PULLEY - R + R Op. 2110A60 MANUAL GEARBOX/ENGINE COUPLING BRACKET - R+R Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION Op. 1020B10 COVER FOR TIMING SYSTEM WITH CHAIN DRIVE - R.R AND REPLACE GASKET Op. 1084B26 ENGINE OIL INTAKE DUCT - R.R 1. Undo the bolts (1a) and remove the oil pump cover (1b).2. Remove the drive gear.3. Remove the driven gear.
Refitting
(
Removing
)
- Place the driven gear in position.- Place the drive gear in position.- Fit the oil pump cover in its housing and tighten the bolts. | Manually rotate the gears to check that they turn without sticking. |