323002129 - 5580C86 SIDE BAG CABLE LOOM (ONE) LH OR RH - R.R OR REPLACE
Removing ( Refitting )FOLLOW ALL THE RECOMMENDED SAFETY INSTRUCTIONS Op. 5580C AIR BAG SYSTEM |
1. Disconnect the electrical connections (1a), (1b), working at the rear of the backrest.2. Disconnect the retainer for the electrical connection from the lumbar band.3. Cut the band retaining the wiring to the lumbar band.4. Release the wiring retainer.5. Extract the backrest wiring branch (5a) from the opening (5b).
1. Detach the electrical connection.2. Disconnect the edge (2a) of the cushion cover from the retainers (2b).3. Disconnect the wiring retainers from the springs.4. Keep the wiring.
1. If necessary, remove the connector holder (1a) from the individual connectors (1b), (1c), (1d) working as described later on.2. If inserted, extract the locking slide.3. Using a screwdriver, move the fastening levers (3a) sideways, in the direction of the arrows.
1. Extract the individul connectors (1a) from the connector holder (1b).
Refitting
(
Removing
)
- Observe the following precautions.
- Check that the wiring is intact and there are no signs of damage.- If new wiring is being fitted, position the labels as described below.- Remove the detachable part of the adhesive label from the new wiring. Place a copy of the label in a special folder containing the vehicle details (model, registration date, chassis number) and the serial number of the old backrest cover. The file should be kept for future checks.- Fit the detachable part of the original label on the lower part of the seat, where similar labels for the seat,Side Bag module and backrest cover can already be found. |